What it means
Your router cannot pass traffic as fast as your plan, even over Ethernet. The check is made over Ethernet, so Wi-Fi is out of the picture.
How we check
We compare the wired download speed through the router with your plan speed. Under 85 percent of the plan counts as strong evidence. At or above 85 percent, we record that the router passes your full plan speed over Ethernet.
The comparison needs your plan speed. Without it, Ground Truth asks you to add it so tests can be compared against it.
A single speed test is never treated as a fault, and the speed tests that are counted are compared with the typical speed from your broadband label when you have entered it.
Rule out the cheaper causes first
- A cable or port linking at 100 Mb caps every test at about 94 Mbps. This is the first thing to check.
- One speed test is not a pattern. With fewer than three tests, a low result is noted as a one-off. With three or more, we count how many came in under 80 percent of your plan or label speed.
- Speed alone cannot say where the slowdown is. It supports whichever layer is past the Wi-Fi.
The free fix
- Unplug the modem and router for 30 seconds.
- Plug in the modem first, then the router once the modem's lights settle.
- Test again.
Give it a minute, then re-test. Each hardware suggestion, if one appears, comes with the measurement that justifies it.
When a new router is suggested
Only when a measurement calls for it: wired speed through the router under 85 percent of your plan, or lag under load graded C or worse across two or more tests with no smart queueing. We describe what to look for, which is smart queueing that works at your plan's speed and wired speed above your plan. We name no brands.
How Ground Truth checks this
The diagnosis is free. On a Mac you can enter your plan and its broadband label to see how often you get less than promised.