What it looks like
A common complaint is “I pay for a gig and get 94 Mbps.” Your Mac's Ethernet cable or port is linking at 100 Mb, which caps every test at about 94 Mbps.
Old or damaged cables often link at 100 Mb.
The measurement that proves it is the Mac's link speed.
How we check
Ground Truth reads the Mac's Ethernet link speed and compares it with your plan speed. If your plan speed is unknown, it uses the typical speed from your broadband label.
Ground Truth reports this under the device layer, the first layer in the path.
- A link at 100 Mb or less on a plan faster than 100 Mbps counts as strong evidence. If the plan speed is unknown, it counts too.
- A link at 1000 Mb or more clears the device.
When it does not apply
If your plan is 100 Mbps or slower, a link at 100 Mb is not a limit and we do not report it. If your plan speed is unknown, we do report it, because a 100 Mb link would cap a faster plan.
The fix
- Check the Mac's link speed.
- Replace the Ethernet cable. Use a Cat 5e or Cat 6 cable.
- Use a gigabit port on the router.
- Re-test. The re-test runs a speed test.
Replacing a cable is a small purchase. It is the only thing in this guide you might need to buy, and the measurement is what tells you to. The swap takes a few minutes.
Why it matters for other checks
When the link is at 100 Mb, Ground Truth does not add a pattern of slow speed tests to the evidence. That pattern is noted only when the link is faster than 100 Mb or unknown.
How Ground Truth checks this
The check belongs to the Mac app, which flags an Ethernet link slower than your plan. It is free. It reads the Mac's own link, so it does not apply on iPhone or iPad.