What double NAT is
Your router sits behind another router, often your provider's gateway. Both routers translate addresses, which can break online games, some VPNs and port forwarding. Some calls struggle too.
A common wrong guess
When games or a VPN misbehave, a common guess is that the router is broken. If the measurements show two routers each translating addresses, putting the provider's box in bridge mode is the fix.
How we tell
We look at your router's internet address. If that address is private, or a private hop sits right after your router, there is a second router in front of it. We count that as strong evidence.
When there is only one, the check says so: only one router translates addresses.
This is one of the network checks, which also cover broken IPv6, a slow router DNS, DNS hijacking, blocked HTTP/3 and packet-size problems, all in one go.
The free fix
- Set the provider's gateway to bridge mode, also called “IP passthrough”, so only one device translates addresses. Your provider can do it for you.
- Or use one router only.
- Give it a minute, then re-test.
The fix is free and takes about an hour.
A related finding: strict NAT
Your router changes your address for every destination, so online games and some calls may fail to connect. This finding appears when NAT is strict and double NAT is not found.
The suggestion is to turn on UPnP or NAT-PMP in the router, or to look for a “full cone” or “endpoint-independent” NAT setting.
A separate finding: a shared address
Ground Truth also reports when your provider uses carrier-grade NAT. Other customers then share your internet address, and port forwarding and hosting will not work. We show it as information. If you need port forwarding, the suggestion is to ask your provider for a public IPv4 address.
How Ground Truth checks this
The network checks are free on iPhone, iPad and Mac. One of them shows whether your connection is Open, Moderate or Strict for games and calls, and spots carrier-grade and double NAT.