What unsteady Wi-Fi looks like
Your Wi-Fi is fast but unsteady, which usually means a busy or noisy channel.
In a survey, we look for spots where latency spiked well above normal even though the average looked fine. Calls and games stutter there.
How we spot it
We need a survey with at least 10 measured spots. We check coverage first. If fewer than 15 percent of the spots are weak, and 25 percent or more are unsteady while still fast, we count that as medium evidence of interference.
On the map, an unstable Wi-Fi finding appears when at least three spots are unsteady.
A home with many weak spots is treated as a reach problem instead, and the guide to weak coverage applies.
Free fixes first
- Change the Wi-Fi channel. In the router's settings, pick a less busy channel: 1, 6 or 11 on 2.4 GHz, or a different 5 GHz channel (149 works well in many homes).
- Use 5 GHz where you can. Near the router, 5 GHz is much faster and less crowded than 2.4 GHz.
- Walk the same rooms again, then re-test.
Each of these takes a few minutes and costs nothing. A re-test means walking the same rooms again, so you can compare the two walks.
Is your channel crowded?
A Mac can scan the networks around you. We report a crowded channel when three or more other networks share or overlap your channel with a signal stronger than -80 dBm.
On 2.4 GHz, the advice is to use channel 1, 6 or 11, whichever is least busy, or move devices to 5 GHz. On 5 GHz, it is to pick a less busy channel in the router's settings.
Power saving is normal
A phone saving power can look like lag. When power saving shows in 10 percent or more of the spots, we note it as normal and not a fault.
How Ground Truth checks this
The survey walk, the Wi-Fi map and the nearby networks view on Mac are free. Switching the map to the Latency and Stability layers, which show delay and steadiness room by room, is part of Pro.